Ejoin Gateway: How To Use eSIM?

Ejoin VoIP and SMS gateway modem eSIM Device Data Operation Manual

1.Identifying eSIM Devices

The software interface of eSIM devices differs from that of other devices, characterized bya white "eSIM" labe linthet opright corner of the software page, indicating eSIM function ality support. When this "eSIM" labelis white, itsignifies that eSIM functiona lityisnotenabled. In such cases, the device can only use physical SIM cards. Forexample, if you have purchased a GoIP 532 eSIM device and eSIM isnotenabled, you can insert up to 32 physical SIM cards for operation.

Enablinge SIM

To use the eSIM function, you need to enableit. Follow these steps:
1.Go to “Advanced Settings”.
2.Navigate to “Other Settings”.
3.Find the “eSIM” optionandenableit.
4.After clicking enable, save the settings and reboot the device to apply the changes.

Once the device restarts, the eSIM function will beactivated.

(Figure1)

2. Once the device comes back online, user will notice that the "eSIM" label in the top right ;corner has turned green. This indicates that the eSIM function is now enabled. Additionally, user can view the eSIM data, including the eUICCID, in the eSIM status section.

(Figure2)

3.eSIM Data Writing

Efficiently recognize and process the received eSIM activation QR code to extract the essential activation data, such as: `LPA:1$testsmdpplus.infineon.com$0000-0000-0000-3003`. Place this data into the activation code field in "eSIM > eSIM Settings" ,as shown in the image below (Figure3). Then, click the "Write" button.

(Figure3)

4. Once the eSIM data is successfully written, user can see the green ICCIDc odein" eSIM > eSIM Status "(as shown in Figure4). After successful registration, user can make calls and  send/receive sms messages.

(Figure4)

5. If the user needs to change/delete the eSIM data, user can delete the written eSIM data by clicking the delete button on the "eSIM > eSIM Settings" page (as shown in Figure5).

(Figure5)